Phenolic Grating For Maximum Fire Resistance
Low smoke & toxic fume emissions for offshore, mines, tunnels, ships & refineries etc.
Phenolic Grating, Phenolic Fibreglass Grating & Phenolic Pultruded Grating
Phenolic Grating
Phenolic Grating available as moulded grating, or pultruded grating, offering maximum fire and smoke resistance, low smoke and toxic fume emissions. Floor grating for offshore mines, tunnels, ships decks and walkways.
Phenolic Moulded Fibreglass Grating
Phenolic Fibreglass Grating is produced in a mould, and is available in various mesh thicknesses and panel sizes. The walking surface can be supplied in a natural concave anti-slip finish or angular quartz grit can be integrally added for superior anti-slip qualities. Phenolic Fibreglass Grating produces the most effective method of achieving maximum fire resistance, low smoke and low toxic fume emissions, ablative and low char yield. Non-flammability enables Phenolic Fibreglass Grating to withstand direct flame for an extended period, without sustaining major structural damage. Fire resistance test data is available on request.
Phenolic Fibreglass Grating offers maximum fire protection, especially in working areas such as oil rigs, underground tunnels, rail subways, refineries, ship’s decks, ship’s life boat access gangways.
Phenolic Pultruded Grating
Phenolic Pultruded Grating is produced by “pulling” a matrix of phenolic resin and pure glassfibre strands, mats and veils through a heated dye to produce “I” or “T” bar sections of various profiles, thicknesses and depths. The “I” or “T” section bars are then converted into Phenolic Pultruded Grating by linking the bars together with Phenolic Pultruded Solid Rods equally spaced between the “I” or “T” section bars.
Phenolic Pultruded Grating is available in 25mm – 38mm – 50mm – 60mm – 75mm and 100mm depths. The “I” or “T” bars can be spaced to provide varying “open” areas to suit specifications.
Pultruded Pultruded Grating is used in high fire risk areas and can be used where exceptional load bearing is required, and also where large uninterrupted spans need to be bridged.
Applications
|
Benefits
|
Panel Thickness & Mesh Size Information
Anti-Slip Surface
Angular Quartz is integrally bonded to the top surface, which produces an extremely long-lasting hardwearing surface. This gritted anti-slip texture has one of the highest degrees of slip resistance ever measured for a walking surface.
British Standard Test Results
The BS4592 test was devised to test and assess the slip resistance of industrial type flooring intended for use in water and wet areas. A co-efficient of friction (CoF) is calculated by determining the mean angle of inclination that an operator can safely maintain when the flooring is subjected to a continuous stream of water.
In addition to improving safety standards Dura Tread Fibreglass Grating provides excellent chemical resistance, is easy to install, and offers long term durability. The gritted anti-slip surface has one of the highest degrees of slip resistance ever measured for a walking surface. Consideration should be given to installing Fibreglass Fabrications, Fibreglass Reinforced Plastics Drain Covers, Glassfibre Stair Treads, Glassfibre Steps, FRP Floor Grid, Moulded Grating and Non Slip Flooring.
These products are ideally suited for Additive Storage Areas, Assembly Lines, Flooring and Platforms.